 |
|
|
Documentation Index
#
# demo cdrouter script for prism usb wifi card
#
#echo Loading USB Prism Module
#modprobe prism2_usb prism2_doreset=1
echo Disabling wlan card
wlanctl-ng wlan0 lnxreq_ifstate ifstate=disable
echo Enabling wlan card
wlanctl-ng wlan0 lnxreq_ifstate ifstate=enable
echo Setting wlan card to adhoc mode
wlanctl-ng wlan0 dot11req_start ssid=linksys bsstype=independent \
dschannel=5 \
beaconperiod=100 dtimperiod=3 probedelay=100 cfpollable=false \
cfpollreq=false basicrate1=11 operationalrate1=11 basicrate2=8 \
operationalrate2=8 basicrate3=4 operationalrate3=4 \
basicrate4=2 operationalrate4=2
#======= ADHOC STATION ============================
#beaconperiod=100 # Beacon interval (in Kus)
#dschannel=5 # DS channel for BSS (1-14, depends
# on regulatory domain)
#BASICRATES="2 4" # Rates for mgmt&ctl frames (in 500Kb/s)
#OPRATES="2 4 11 22" # Supported rates in BSS (in 500Kb/s)
# echo Configuring wlan0 interface
# ifconfig wlan0 10.10.10.1 netmask 255.255.255.0 broadcast 10.10.10.255
# echo Adding default gateway
# route add default gw 192.168.1.1
# echo Configuring wlan0 interface
# ifconfig wlan0 10.10.10.1 netmask 255.255.255.0 broadcast 10.10.10.255
# echo Adding default gateway
# route add default gw ppp0
Documentation Index
|
|
|
|
|
